HART data collector, hart gateway, 8-channel hart to modbus protocol converter SM100-M-8
Product Features
- Eight HART devices can be connected simultaneously, and all HART channels set up for the HART data collector can be scanned both simultaneously and in parallel.
- Three-terminal electromagnetic complete quarantine between the host power supply and HART channels. The two-wire interface is used by every channel. The HART module's electromagnetic quarantine voltage must be at least 1500 V. The ability to separate HART signals (4–20 ma) is supported.
- Both RS485 and NET Ethernet interfaces must have a quarantine voltage of at least 1500 V.
- Use a modular design that isolates the HART module from the host and allows for online HART module replacement in any channel.
- An independent indicator light is supplied for each channel, indicating the communication status of the HART equipment and whether the equipment is online.
- Equipped with a communication interface, operation/fault indicator light, etc.
- Channel-wise data refresh rate ≥ 1 second.
- Support RS485 and Ethernet interfaces with a minimum speed of 100 Mbps.
- All HART devices' HART IDs can be read using proprietary HART commands.
- Support Telnet remote settings, as well as configuration and operating modes.
- Update firmware programs are supported.
- As long as the loop resistance is less than or equal to 250 ohms, the equipment supports standard DIN rail mounting and has no effect on the accuracy or transmission of a 4–20 mA analog signal under normal, power failure, or fault conditions.
- Field instruments are not powered by this equipment.
- It is compatible with HART protocol Ver5.0 and higher.
Main Parameters
- DC 24V is the power supply voltage.
- Current of operation: less than 80mA The shell is 305 mm in length, 160 mm in width, and 35 mm in height.
- The installation is 347.4 mm in length, 35 mm in width, and 160 mm in height.
- The operating temperature is between -20°C and +75°C.
- Workplace humidity: 5% to 95% (no condensation).
FAQ
1.Are you a factory or trading company?
We are a high-tech enterprise factory integrating R&D, production and sales. We have a complete ERP system and equipment, which can meet your procurement needs.
2.Delivery?
Goods will be dispatched within three working days after receiving the payment.
3.MOQ？
Under normal circumstances, we support a minimum order of one piece.
4.IS OEM service available ?
Yes, product could print your logo , or customized by your design.
5.Payment?
100% payment. You can make the payment by telegraphic transfer.
6.What is the size of the SM100-M product?
305 mm long × 160 mm wide × 35 mm high.
7.How many hart instruments can the SM100-M-8 collect?
It can connect up to 8 hart instruments at most.
Contact US
All products of our company come with a three-year warranty.
If you encounter any problems during use, please contact us. WhatsApp contact information: 18105734868, WeChat contact information: 17769909079