Products Categories

China SM100-M-8 HART Data Collector - Reliable HART to Ethernet & MODBUS RTU/TCP Converter | Suppliers & Factory

The SM100-M-8 HART data collector is an advanced product engineered in China utilizing an ARM microprocessor and a HART protocol modem chip. This cutting-edge device is built based on extensive practical experience, ensuring it meets the high standards required for industrial applications. Known for its reliability and stability, the SM100-M-8 is designed to facilitate seamless data communication, Equipped with a standard RS485 interface and a gateway, this data collector can transparently transmit data from intelligent HART protocol instruments. It also offers the functionality to convert data into MODBUS RTU or MODBUS TCP protocols, enabling efficient data retrieval and ensuring real-time data transmission. As a leading manufacturer and supplier in the industry, our factory prioritizes quality and innovation in every product we offer, making the SM100-M-8 an essential solution for reliable data collection in various industrial settings

Product Details

Product Introduction

A product called the SM100-M-8 HART data collector was created using an ARM microprocessor, a HART protocol modem chip, and a great deal of real-world experience. It offers great stability and dependability and is designed to meet the specifications of industrial items. To ensure real-time data transmission, the data collector is outfitted with a standard RS485 interface and gateway that can either convert data into MODBUS _ RTU or MODBUS _ TCP protocol to read data or transparently communicate data with intelligent instruments using HART protocol.

The HART protocol instrument enables bidirectional data transmission without interfering with the 4 to 20 mA analog signal by superimposing a modulated digital signal on a 4 to 20 mA basis using the Bell202 Frequency Shift Keying (FSK) standard. An clever converter for bidirectional modulation and demodulation of digital and analog signals is the SM100-M series HART data collector.

Product Features

Support simultaneous connection of 8 HART devices.
Support parallel and simultaneous scanning of all HART channels configured for the HART data collector.
Three-terminal electromagnetic full quarantine between HART channels and between HART and host power supply. Each channel adopts two-wire interface. The voltage of electromagnetic quarantine of HART module is not less than 1500 V. It supports the function of separating HART signal/4 ~ 20ma signal.
The quarantine voltage of RS485 interface and NET Ethernet interface shall not be lower than 1500 V.
Adopt the modular design of separating the HART module from the host, and support the function of replacing the HART module online in any channel.
Each channel is provided with an independent indicator light, which provides indication of HART equipment online and HART equipment communication status respectively.
Equipped with equipment status indicator light: operation/fault, communication interface, etc.
Data refresh rate per channel < 1 second.
Support Ethernet interface (speed not less than 100Mbps) and RS485 interface.
Support proprietary HART commands to read the HART ID of all HART devices.
Support configuration and operation mode, and support Telnet remote setting.
Support firmware program update.
Supports standard DIN rail mounting.
The equipment does not affect the transmission and accuracy of 4 ~ 20 mA analog signal in normal, power failure or fault, and the loop resistance is less than or equal to 250 ohms.
This equipment does not supply power to field instruments.
Compatible with HART protocol Ver5.0 and above.

Main Parameters

Power supply voltage DC 24V

Operating current < 80mA

Shell size 305 mm × 160 mm × 35 mm

Installation dimension 347.4 mm (L) × 35 mm (W) × 160 mm (H)

Working temperature -20 ℃ ~ + 75 ℃

Humidity of working environment 5% ~ 95% (no condensation)

Frequently Asked Questions

How many HART devices can the SM100-M-8 connect to simultaneously?

The SM100-M-8 HART data collector supports the simultaneous connection and scanning of up to 8 HART devices.

What protocols can the data collector convert HART data into?

It can convert data into either MODBUS_RTU or MODBUS_TCP protocols, or transmit data transparently with intelligent instruments.

Does the device affect the 4 to 20 mA analog signal transmission?

No, the equipment does not affect the transmission and accuracy of the 4 to 20 mA analog signal under normal operation, power failure, or fault conditions.

What is the data refresh rate of the SM100-M-8?

The data refresh rate per channel is less than 1 second, ensuring real-time data transmission.

What are the mounting and installation options?

The device supports standard DIN rail mounting and is designed with compact dimensions for easy industrial integration.

Does this data collector supply power to field instruments?

No, this equipment does not supply power to field instruments.